Location:
Link against:
DIAL_OUT_IAP
Supported from 6.0
Withdrawn in 6.1
Dial-out Internet Access Point.
This has been replaced by the IAP
table.
The DIAL_OUT_IAP
table contained the field IAP_CHARGECARD
and the following:
IAP_ISP
IAP_ISP
Withdrawn in 6.1
Identifier of (dial out) ISP in this IAP
Type: TUint32
. Null: no.
IAP_MODEM
IAP_MODEM
Withdrawn in 6.1
Identifier of modem in this IAP.
Type: TUint32
. Null: yes.
IAP_LOCATION
IAP_LOCATION
Withdrawn in 6.1
Identifier of location in this IAP.
Type: TUint32
. Null: yes.
MODEM_PREFS
Withdrawn in 6.0
Modem preferences.
Fields for this table are in
the MODEM
table in later versions.
MODEM_CONFIG
Withdrawn in 6.0
Modem configuration.
Fields for this table are in
the MODEM
table in later versions.
DIAL_IN_SERVICE
Withdrawn in 6.0
Dial-in ISP.
EPOC Release 5 did not support dial-in functionality, and this is no longer documented.
The Modem preferences table contained the
fields COMMDB_NAME
, COMMDB_ID
, and the
following.
MODEM_PAUSE_TIME
MODEM_PAUSE_TIME
Withdrawn in 6.0
Preferred pause time indicated by use of comma character in dial string.
Type: TUint32. Null: no.
The Modem configuration table contained the fields:
MODEM_XON_XOFF_HANDSHAKE
MODEM_XON_CHAR
MODEM_XOFF_CHAR
MODEM_VERBOSE_TEXT
MODEM_TSY_NAME
MODEM_SPECIAL_RATE
MODEM_SPEAKER_VOLUME
MODEM_SPEAKER_VOL_CONTROL_MEDIUM
MODEM_SPEAKER_VOL_CONTROL_LOW
MODEM_SPEAKER_VOL_CONTROL_HIGH
MODEM_SPEAKER_ON_UNTIL_CARRIER
MODEM_SPEAKER_ON_AFTER_DIAL_UNTIL_CARRIER
MODEM_SPEAKER_ALWAYS_ON
MODEM_SPEAKER_ALWAYS_OFF
MODEM_SPEAKER
MODEM_RTS_CTS_HANDSHAKE
MODEM_RETURN_TO_FACTORY_DEFS
MODEM_RESET_CONFIGURATION
MODEM_RATE
MODEM_QUIET_ON
MODEM_QUIET_OFF
MODEM_PROTOCOL_NONE
MODEM_PROTOCOL_LAPD
MODEM_PROTOCOL_ALTCELLULAR
MODEM_PROTOCOL_ALT
MODEM_PORT_NAME
MODEM_ON_LINE
MODEM_NO_DIAL_TONE
MODEM_NO_ANSWER
MODEM_MODEM_INIT_STRING
MODEM_HANDSHAKING
MODEM_FAX_INIT_STRING
MODEM_FAX_CLASS_INTERROGATE
MODEM_FAX_CLASS
MODEM_FAX_CLASS
MODEM_ESCAPE_GUARD_PERIOD
MODEM_ESCAPE_CHARACTER
MODEM_ECHO_OFF
MODEM_DTR_HANG_UP
MODEM_DSR_ALWAYS_ON
MODEM_DIAL_TONE_WAIT_MODIFIER
MODEM_DIAL_PAUSE_LENGTH
MODEM_DIAL_COMMAND_STATE_MODIFIER
MODEM_DCD_ON_DURING_LINK
MODEM_DATA_INIT_STRING
MODEM_CSY_NAME
MODEM_CONNECT
MODEM_COMPRESSION_V42BIS
MODEM_COMPRESSION_NONE
MODEM_COMPRESSION_CLASS_5
MODEM_CARRIER_TIMEOUT
MODEM_CARRIER
MODEM_CALL_PROGRESS_4
MODEM_CALL_PROGRESS_3
MODEM_CALL_PROGRESS_2
MODEM_CALL_PROGRESS_1
MODEM_BUSY
MODEM_AUTO_ANSWER_RING_COUNT
COMMDB_STOP_BITS
COMMDB_PARITY
COMMDB_NAME
COMMDB_ID
COMMDB_DATA_BITS
and the following:
MODEM_PARITY_ERROR
MODEM_PARITY_ERROR
Withdrawn in 6.0
Parity error
Type: TUint32. Null: yes
MODEM_FIFO
MODEM_FIFO
Withdrawn in 6.0
FIFO.
Type: TUint8. Null: yes
MODEM_TERMINATOR_COUNT
MODEM_TERMINATOR_COUNT
Withdrawn in 6.0
Terminator count
Type: TUint8. Null: yes
MODEM_TERMINATOR0
MODEM_TERMINATOR0
Withdrawn in 6.0
First terminator character.
Type: TUint8. Null: yes
MODEM_TERMINATOR1
MODEM_TERMINATOR1
Withdrawn in 6.0
Second terminator character.
Type: TUint8. Null: yes
MODEM_TERMINATOR2
MODEM_TERMINATOR2
Withdrawn in 6.0
Third terminator character.
Type: TUint8. Null: yes
MODEM_TERMINATOR3
MODEM_TERMINATOR3
Withdrawn in 6.0
Fourth terminator character.
Type: TUint8. Null: yes
MODEM_PARITY_ERROR_CHAR
MODEM_PARITY_ERROR_CHAR
Withdrawn in 6.0
Parity error character
Type: TUint8. Null: yes
MODEM_SIR_ENABLE
MODEM_SIR_ENABLE
Withdrawn in 6.0
SIR enable
Type: TUint8. Null: yes
MODEM_SIR_SETTINGS
MODEM_SIR_SETTINGS
Withdrawn in 6.0
SIR settings
Type: TUint32. Null: yes
MODEM_DEFAULT_PORT_NAME
MODEM_DEFAULT_PORT_NAME
Withdrawn in 6.0
Default Port Name:Default comm port to be used if this modem is specified as a connected modem
Type: Text. Null: yes
MODEM_DEFAULT_TSY_NAME
MODEM_DEFAULT_TSY_NAME
Withdrawn in 6.0
Default TSY Name:Default TSY to be used if this modem is specified as a connected modem
Type: Text. Null: yes
MODEM_DEFAULT_CSY_NAME
MODEM_DEFAULT_CSY_NAME
Withdrawn in 6.0
Default CSY Name:Default CSY to be used if this modem is specified as a connected modem
Type: Text. Null: yes
MODEM_DEFAULT_FAX_CLASS
MODEM_DEFAULT_FAX_CLASS
Withdrawn in 6.0
Default fax class
Type: TUint32. Null: no
MODEM_DEFAULT_SPEAKER
MODEM_DEFAULT_SPEAKER
Withdrawn in 6.0
Default speaker mode
Type: TUint32. Null: no
MODEM_DEFAULT_SPEAKER_VOLUME
MODEM_DEFAULT_SPEAKER_VOLUME
Withdrawn in 6.0
Default speaker volume
Type: TUint32. Null: no
MODEM_DEFAULT_PAUSE_TIME
MODEM_DEFAULT_PAUSE_TIME
Withdrawn in 6.0
Default Pause Time:Default pause time indicated by the use of the comma character in the dial string
Type: TUint32. Null: no
MODEM_PAUSE_TIME
MODEM_PAUSE_TIME
Withdrawn in 6.0
Preferred pause time indicated by use of comma character in dial string
Type: TUint32. Null: no
MODEM_TSY_CONFIG_ID
MODEM_TSY_CONFIG_ID
Withdrawn in 6.0
TSY Config ID: a reference to a TSY specific table containing additional modem information
Type: TUint32. Null: yes
The Dial out service table contained the fields:
ISP_TYPE
ISP_DESCRIPTION
ISP_ENABLE_SW_COMP_FIELD
ISP_DISABLE_PLAIN_TEXT_AUTH
ISP_ENABLE_LCP_EXTENSION
ISP_ENABLE_IP_HEADER_COMP_FIELD
ISP_IP_NAME_SERVER2
ISP_IP_NAME_SERVER1
ISP_IP_DNS_ADDR_FROM_SERVER
ISP_IP_GATEWAY
ISP_IP_NETMASK
ISP_IP_ADDR
ISP_IP_ADDR_FROM_SERVER
ISP_IF_CALLBACK_INFO
ISP_IF_CALLBACK_TYPE
ISP_IF_CALLBACK_ENABLED
ISP_IF_AUTH_PASS
ISP_IF_AUTH_NAME
ISP_IF_PROMPT_FOR_AUTH
ISP_IF_NETWORKS
ISP_IF_PARAMS
ISP_IF_NAME
ISP_DISPLAY_PCT
ISP_LOGIN_PASS
ISP_LOGIN_NAME
ISP_LOGIN_SCRIPT
ISP_USE_LOGIN_SCRIPT
ISP_PROMPT_FOR_LOGIN
ISP_DEFAULT_TEL_NUM
ISP_MODEM_ID
ISP_SUGGEST_MODEM
ISP_DIAL_RESOLUTION
COMMDB_PARITY
COMMDB_STOP_BITS
COMMDB_DATA_BITS
COMMDB_ID
COMMDB_NAME
and the following:
ISP_IP_HOST_NAME
ISP_IP_HOST_NAME
Withdrawn in 6.0
Internet host name
Type: Text. Null: yes
ISP_IP_DOMAIN_NAME
ISP_IP_DOMAIN_NAME
Withdrawn in 6.0
Internet domain name
Type: Text. Null: yes
ISP_IP_DEFAULT_ROUTE
ISP_IP_DEFAULT_ROUTE
Withdrawn in 6.0
Make this interface the default route when opened?
Type: TBool. Null: no
ISP_ALT_LOC1
ISP_ALT_LOC1
Withdrawn in 6.0
Alt Loc 1: ID of first location with an alternative phone number
Type: TUint32. Null: yes
ISP_ALT_TEL_NUM1
ISP_ALT_TEL_NUM1
Withdrawn in 6.0
Alt Tel Num 1: Phone number to be used for first alternative location
Type: Text. Null: yes
ISP_DIAL_RES_ALT_LOC1
ISP_DIAL_RES_ALT_LOC1
Withdrawn in 6.0
Dial Res Alt Loc 1: Perform dialling resolution for first alternative phone number?
Type: TBool. Null: no
ISP_ALT_LOC2
ISP_ALT_LOC2
Withdrawn in 6.0
Alt Loc 2: ID of second location with an alternative phone number
Type: TUint32. Null: yes
ISP_ALT_TEL_NUM2
ISP_ALT_TEL_NUM2
Withdrawn in 6.0
Alt Tel Num 2: Phone number to be used for second alternative location
Type: Text. Null: yes
ISP_DIAL_RES_ALT_LOC2
ISP_DIAL_RES_ALT_LOC2
Withdrawn in 6.0
Dial Res Alt Loc 2: Perform dialling resolution for second alternative phone number?
Type: TBool. Null: no
The Location table contained the fields:
LOCATION_WAIT_FOR_DIAL_TONE
LOCATION_USE_PULSE_DIAL
LOCATION_PAUSE_AFTER_DIAL_OUT
LOCATION_NAT_PREFIX_CODE
LOCATION_NAT_CODE
LOCATION_MOBILE
LOCATION_INTL_PREFIX_CODE
LOCATION_DISABLE_CALL_WAITING_CODE
LOCATION_AREA_CODE
COMMDB_NAME
COMMDB_ID
and the following:
LOCATION_CHARGECARD_ID
LOCATION_CHARGECARD_ID
Withdrawn in 6.0
ID of chargecard record to be used at this location
Type: TUint32. Null: yes
LOCATION_DIAL_OUT_LOCAL_CODE
LOCATION_DIAL_OUT_LOCAL_CODE
Withdrawn in 6.0
Dial Out Local Code:Number to dial for an outside local line
Type: Text. Null: yes
LOCATION_DIAL_OUT_LONG_DISTANCE_CODE
LOCATION_DIAL_OUT_LONG_DISTANCE_CODE
Withdrawn in 6.0
Dial Out Long Distance Code:Number to dial for an outside long distance line
Type: Text. Null: yes
LOCATION_PBX_USE_PULSE_DIAL
LOCATION_PBX_USE_PULSE_DIAL
Withdrawn in 6.0
PBX Use Pulse Dial:Use pulse dialling when dialling internally?
Type: TBool. Null: no
LOCATION_WAIT_FOR_PROCEED_TONE
LOCATION_WAIT_FOR_PROCEED_TONE
Withdrawn in 6.0
Wait for the proceed tone?
Type: TBool. Null: no